7. Technical Data
Engine Parameters
Model 4A13M1 4A15K1
Layout pattern Front-transverse mounted Front-transverse mounted
Type
Gasoline, spark ignition type, in-line, four-stroke,
water-cooling, multi-point electronic controlled
injection, double overhead camshafts, exhaust
turbocharging
Gasoline, spark ignition type, in-line, four-stroke,
water-cooling, multi-point electronic controlled
injection, double overhead camshafts, exhaust
turbocharging
Number of cylinders 4 4
Ignition order 1-3-4-2 1-3-4-2
Cylinder diameter (mm) 75 75
Stroke (mm) 75 84.6
Displacement (mL) 1325 1495
Compression ratio 9.8: 1 11:1
Rated power / Rotated speed per Minute (kW/(r/min)) 101/5500 84/6000
Maximum net power / rotated speed per minute
(kW/(r/min))
93/5500 79/6000
Maximum torque / rotated speed per minute（N*m/
（r/min））
202/1500~4200 150/4500
Maximum net torque / rotated speed per minute （N*m/
（r/min））
192/1500~4200 141/4500
Idling stabilization RPM (r/min) 700 700
Note:
1)
Adding fuel oil with sulfur content higher than the standard for a long time may cause excessive emission. Please pay attention to use the fuel oil meeting the
standards of vehicle selling place.
To Next Page
Loading...
