EasyManua.ls Logo

GAC GA4 - Page 65

GAC GA4
365 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4. Operating System and Equipment
4.1.2.1 Indicator Lig
ht
S/N Icon Name Color Function
1
Engine malfunction
indicator light
Yellow
With the Start or Ignition switch at "ON” position, the indicator light illuminates for a few seconds and
then extinguishes after self-checking of the system if the engine is not started and there is no fault.
After the engine starting, if the indicator light is lit, it indicates that there is a fault in the engine system.
2
Emission failure
indicator light
Yellow
With the Start or Ignition switch at "ON” position, the indicator light is lit when the engine is not started
and is off after the engine is started.
After the engine starting, if the indicator is still on, it indicates that there is a fault in the exhaust system.
3
EPB status indicator
light*
Red
If the indicator light is lit (red), it indicates that the EPB is applied.
If the indicator light (red) flashes, it indicates that the EPB is partly engaged or failed.
Green If the indicator light is lit (green), it indicates that electronic automatic parking is activated.
4
Parking brake and
brake system
indicator light
Red
If the indicator light is lit, it indicates that the hand brake is set, the brake fluid level is too low or there is
a fault in the electric brakeforce distribution (EBD) system.
5
Tire pressure
monitoring system
(TPMS) indicator
light*
Yellow If the indicator light is lit, it indicates that there is a fault in TPMS.
6
Charging system
warning light
Red
With the Start or Ignition switch at "ON” position, the warning light is lit when the engine is not started
and is off after the engine is started.
After the engine starting, if the warning light is lit, it indicates that there is a fault in the charging system.
7
Left turn signal and
hazard warning
indicator light
Green
When the left turn signal indicator light flashes alone, it indicates that the left turn light is turned on.
When the hazard warning indicator light switch is pressed, the left/right turn signal indicator lights will
flash together with all the outside turn signal lights.
8
High beam indicator
light
Blue If the indicator light is lit, it indicates that high beams are turned on.
9
Position light indicator
light
Green
If the indicator light is lit, it indicates that the position lights, instrument panel light, number plate lights,
etc. are turned on.
59

Table of Contents

Related product manuals