4. Operating System and Equipment
Anti
-Pinch Initializ
ation*
Initialization
must
be performed again if the
driver side electric window cannot move up
automatically due to anti-pinch function failure, or if
initialization data of anti-pinch has been
automatically erased due to the anti-pinch function
being activated for quite a few times in a short
period.
When the electric window button on the
driver's side is pulled up, the window moves up
step by step until it is closed completely. Then
continue to pull up and hold the button for 2 to 3
seconds. The initialization is thus completed.
Hint
During initialization learning, the window has
no anti-pinch function, so do not use any part of the
body or other articles to obstruct the window
movement. Otherwise, injury may be caused and
the initialization affected.
Hint
If the electric window system fails, contact your
authorized GAC MOTOR dealer to have it checked
and repaired.
To Next Page
Loading...
