4. Operating System and Equipment
– The
figure shows that the electric sunroof
slides to fully open position.
Sunroof Anti-pinch Function
When the sunroof slides to close or is closed
downward from tilting, the anti-pinch function will be
activated. The purpose of the anti-pinch function is
to prevent the sunroof from pinching big items
when it is closed:
● When the sunroof slides to close, if the anti-
pinch function is triggered, the sunroof will
move a certain distance along the open
direction and then stop.
● When the sunroof is closed from tilting, if the
anti-pinch function is triggered, the sunroof will
move along the tilt direction until the maximum
tilt position.
Caution
Do not try to operate the electric sunroof in low
temperature (below -20°C). In such environment,
the anti-pitch function may not be activated,
resulting in accidents. Also, low temperature can
damage the sunroof motor.
Warning
● Be sure to close the electric sunroof with
extra care. To avoid serious injury, make
sure that nobody stays within the area of
closing movement.
● The anti-pinch function cannot prevent the
electric sunroof from pinching human
fingers or other items in small size.
• The electric sunroof stops sensing
obstacle when it is almost closed. At this
time, there is no anti-pinch function.
• Do not attempt to activate the anti-pinch
function by hand or your body part. Doing
so can cause serious injury to your body
easily.
To Next Page
Loading...
