Gaggenau CMP 250 - Cleaning the Milk System; Quick Rinse for Milk System; Manual Milk Frother Cleaning

23
Cleaning the milk system
m
Risk of burns!
The milk system becomes very hot. After use, allow it to
cool down first before touching it.
Note: All components can also be cleaned in the
dishwasher.
The milk system can be automatically precleaned (
Quick
rinse for the milk system
). In addition, the milk frother must
be taken apart and cleaned (Cleaning the milk system).
Quick rinse for the milk system
1 Turn the function selector to S.
2 Use the rotary selector to select "Quick rinse
programme for milk system" and confirm using ™.
3 Open the flap on the coffee dispenser, connect the
milk hose and feed it out through the opening on
the right. Close the flap.
4 Place a cup under the milk frother and place the
end of the milk hose in the cup.
5 Confirm using ™ and start by using I.
The appliance automatically cleans the milk system.
It takes about a minute to complete the rinsing
process.
6 Confirm with ™.
7 Empty the cup and clean the milk hose.
Cleaning the milk system
1 Open the flap on the coffee dispenser and pull out
the milk frother forwards.
2 Wipe the holder for the milk frother with a damp
cloth.
3 Remove the milk hose. Turn the upper part in an
anti-clockwise direction and remove from the lower
part.
4 Clean individual parts with detergent solution and a
soft cloth or put them into the dishwasher
(cutlery basket).
5 Put the individual parts back together until the two
marks are vertically stacked. Then insert the milk
frother into the appliance as far as it will go.
4XLFN5LQVH3URJUDPPH
)RU0LON6\VWHP