Gaggia Babila - Machine Technical Specifications; Machine Parameters and Performance

GAGGIA BABILA 02 TECHNICAL SPECIFICATIONS
1/6
2.1. Technical specications
Power supply and output: 240 V~ 50 Hz 1400 W - 230 V~ 50/60 Hz 1400 W -
120 V~ 60 Hz 1500 W - 100 V~ 50/60 Hz 1300 W
Temperature monitoring: Variable resistor sensors (NTC)
transmits the value to the control board
Safety system: 2 manual reset or one-shot thermostats (175°C)
Coee heat exchanger output:
Stainless steel
(230/120 V~) 1300 W – (100 V~) 1100 W
to dispense coee, hot water and steam
Steam heat exchanger output:
Stainless steel
As above
Gearmotor: 2 rotation directions; 24VC power supply
Coee pump Ulka Type EP5/S GW approx. 13-15 bar with reciprocating
piston and 120°C cutout 48 W, 230V, 50 Hz, 120V, 60Hz 100V,
50/60 Hz
Steam pump Ulka MF with reciprocating piston 230V, 50 Hz, 120V, 60Hz 100V
50/60 Hz
Overpressure valve:
(multi-way valve)
Opening at approx. 17-23 bar
Water lter: In tank
Coee grinder: Direct current motor with at ceramic grinder blades
Automatic dosage Dose adjustment controlled by the electronic system
Consumption: During the heating phase - approx. 5.6 A
Consumption in Stand-by < 1 W
Dimensions: W x H x D in mm: 245x360x420 (data may vary depending on the model)
Weight: 13.4 kg (data may vary depending on the model)
Water tank capacity: 1.5 l.
Coee container capacity 300 g coee beans
Dreg drawer capacity 11
Heat exchanger capacity: Approx. 10 cc
Water circuit lling time: Approx. 15 sec. max on rst lling cycle
Heating time: Approx. 45 sec.
Grinding time: Approx. 8-10 sec.
2.2. Machine parameters and performance
PRODUCT
QUANTITY
Min
quantity
(Puls.)
Max
quantity
(Puls.)
Max
quantity
(Puls.)
Set
by the user
Set by
the Production/Service
Dept
Expresso 50 130 - 170 * 600 Yes No
Expresso
lungo
70 200 - 230 * 600 Yes No
Pre-ground Yes
Hot water Continues for 400 pulses
Steam
nozzle
Continues until the water is used up (capacitive sensor)
* Depends on the language selected by the user