Gaggia Babila - Test Mode Operation

GAGGIA BABILA 05 SERVICE MODE
1/13
5.1. Test mode
Description
When the machine is in Factory Test Mode appears a windows divided in several sectors:
The rst row of each window is a title, the red sectors represents the functions (or loads) available to activate or de-
activate, the last row is used to show other info. When a function is enabled the corresponding box becomes colored.
The dotted sectors is used to show informations about the status of microswitch, sensors or other variables.
The presence of symbol (^) into a sector indicate that no function is associated to.
The following image show the corrispondence between the keyboard and red sectors:
The keyboard buttons (ESC, OK, UP and DOWN), highlighted in yellow, have the following functions:
UP : go to next page
DOWN : go to previous page
OK ( ): conrm / enable / disable function
ESC ( ) : exit from Factory Test Mode
To enter Test Mode:
- Switch on the machine
- Wait until the display lights
- Press the four function keys in the
sequence indicated (1, 2, 3, 4)
MV :
Software xx.yy.zz
WW Debug
D. TM
PO Exit
^
^
^
^ ^ ^
ON/OFF
Carafe cleaning
cycle activation
Espresso
button
Coe
button
“Special Drink”
button
Espresso Long
button
Cappuccino
button
Latte macchiato
button
1
3
4
2
=
=
N= O=