Gaggia Babila - Frother Valve Assembly Disassembly; Dispenser Assembly Disassembly; CPU Water Level Sensor Removal

GAGGIA BABILA 07 DISASSEMBLY
8/11
7.12. Frother valve assembly
7.14. CPU Water level Sensor
7.13. Dispenser assembly
Loosen the screws as shown
and remove the frothing valve
Disconnect the electrical and water connections
Loosen the screws as shown to remove
the inner cover of the front panel
Loosen the screws as shown to remove the inner cover of the
front panel and disconnect the electricalconnections
Loosen the screws as shown and
remove the coee dispenser assembly
(picture A)
AA
BB
Remove the dispenser (picture B)
making sure to reposition the highlighted spring
correctly