7/13
Operation:
• C+: increases the contrast of the display
• C-: decreases the contrast of the display
• L+: increases the brightness of the display
• L-: decreases the brightness of the display
Indicators
• The values at the bottom are indices representing the brightness and contrast: in this case these
values are not saved to eeprom as they have solely a test function
Operation:
• Boil1: illuminates when the coee boiler is powered
• Boil2: illuminates when the steam boiler is powered
• Start: starts the draining process
Indicators:
• The values at the bottom are the temperatures of the two boilers and the countdown (T.O) be-
fore the machine requests switching o.
This is the last screen of the Test Mode. Press UP to go back to the previous screens.
On each screen, pressing ESC exits the TEST mode and restarts the appliance in normal mode.
^
^
Press DOWN o move to the next screen
C +
C -
DISPLAY
L +
L -
127
30
^
^
^
^^
^
^
Boil 1 Boil 2
C -
STEAM OUT
Start
L -
93,3 116,4
T 0
^
^
^
^
^
Display
5.2. Steam-out
Before executing the steam out procedure, descale the machine taking care to remouve the Aqua-
clean lter from the appliance.
In case the lter on the machine is active (or it’s in the machine) provide the consumer with a
new one.
Countdown
To Next Page
Loading...
