31
MAINTENANCE SETTINGS
PRODUCT COUNTERS
DESCALING CYCLE
BREW UNIT CLEANING CYCLE
CARAFE WASH CYCLE
CARAFE AUTO CLEAN
This menu allows setting all the functions for correct machine maintenance
This function shows how many products have been brewed for every single
type of coee since the last reset.
This function enables the descaling cycle (the machine shows how many
litres can be dispensed before descaling) (See page 33).
This function enables the wash cycle for the brew group (See page 32).
This function enables automatic cleaning of the carafe after each dispensing
of milk-based products.
MAINTENANCE SETTINGS
OFF
ON
The self-cleaning function is disabled.
The self-cleaning function is enabled.
This function enables the wash cycle for the carafe used for preparing milk
beverages (See page 36).
Note: This wash cycle is fundamental for a correct maintenance of
the carafe.
FACTORY SETTINGS
This function allows you to restore all factory settings.
Note: By restoring the factory settings, all the personal parameters
are lost.
To Next Page
Loading...
