Gaggia SUP-038G User Manual

4
1
4
7 8
5 6
32
StartinG tHe maCHine
Beforeturningonthemachine,makesurethatthepowerbuttonissetto"0".
Lift the right outer lid and remove the
inner lid.
Removethewatertankusingthehandle.
Pressthepowerbuttontothe"I"
position to turn the machine on.
Thedisplayshowsaredashingled.
Press the stand-by button to start the
machine.
Fillthetankwithfreshdrinkingwater.Do
notexceedthe"max"levelindicatedon
thewatertank.Placethewatertankback
into the machine.
Insert the plug into the socket located
on the back of the machine and insert
theotherendintoapoweroutletwith
suitable current.
Slowlypourcoeebeansintothe
hopper.
Replace the inner lid and close the outer
lid.
Lift the left outer lid and remove the
inner lid.
When the correct temperature is
reached, the machine performs a
priming and rinsing cycle of the
internal circuits. A small amount of
waterisdispensed.Waitforthiscycle
to be completed.
The screen for product dispensing
appearsonthedisplay;seepage3.
inStallation
Atrststart-uponly,thescreen(1)willbedisplayedasshownonpage5.Then,thelanguagecanbesetfromtherelevantmenuonly
(see page 25).

Gaggia SUP-038G Specifications

General

Brand	Gaggia
Model	SUP-038G
Category	Coffee Maker
Language	English