-
-
-18--18-
8. - MAINTENANCE8. - MAINTENANCE
8.1. - GENERAL PRECAUTIONS8.1. - GENERAL PRECAUTIONS
ALALWAYS RESPECT SAFETY INDICATIONS DESCRIBED IN THIS MANUAWAYS RESPECT SAFETY INDICATIONS DESCRIBED IN THIS MANUALL
Always close the shutoff valve with Always close the shutoff valve with a padlock when carrying out any kind a padlock when carrying out any kind of maintenance task on theof maintenance task on the
installation. Discharge the air remaining in the pipe by activating the electrically controlled valve (installation. Discharge the air remaining in the pipe by activating the electrically controlled valve (the starter will
the starter will
try to work, try to work, pay attention to the movements that take place)pay attention to the movements that take place), or else allow this air to discharge smoothly by, or else allow this air to discharge smoothly by
slowly loosening any plug.slowly loosening any plug. If there is a pressure gauge at the inlet to the starter, use it check for absenceIf there is a pressure gauge at the inlet to the starter, use it check for absence
of of pressure.pressure.
Always use original GALI spare parts. Always use original GALI spare parts. The spare parts that are The spare parts that are not GALI originals can generatenot GALI originals can generate
hazards or malfunctioning of the starter.hazards or malfunctioning of the starter.
8.2. - MAINTENANCE PROGRAM
8.2. - MAINTENANCE PROGRAM
The preventive maintenaThe preventive maintenance of the GALI nce of the GALI starters greatly depends on the use that the starters greatly depends on the use that the corresponding user makescorresponding user makes
thereof, both for the frequency of start-ups and for the type of motor. Indeed, a starter that never worksthereof, both for the frequency of start-ups and for the type of motor. Indeed, a starter that never works
deteriorates more quickly than one which does so with a deteriorates more quickly than one which does so with a certain frequency (for example, once a week).certain frequency (for example, once a week).
Periodically check the oil level which should always be Periodically check the oil level which should always be servolubricatoservolubricator between MAX. andr between MAX. and
MIN..MIN..
If the oil If the oil has to be replaced by other has to be replaced by other low temperature must be completely disassembled the starter, be carefullylow temperature must be completely disassembled the starter, be carefully
cleaned, ensuring that no residual oil before the lock could cause the cleaned, ensuring that no residual oil before the lock could cause the starter.starter.
Then lubricate all parts with the new Then lubricate all parts with the new oil and re-assemble the starter.oil and re-assemble the starter.
To achieve maximum duration and reliability in the operation of the GALI starter, To achieve maximum duration and reliability in the operation of the GALI starter, thethe
maintenanmaintenance program should be ce program should be carried out which carried out which is detailed next.is detailed next.
To Next Page
Loading...