-
-
-25--25-
11.- 11.- ACCESSORIES ACCESSORIES FOR FOR THE THE INSTALLINSTALL ATIONATION
Complete Complete installation of installation of any motor can be carried out on any motor can be carried out on order.order.
GALI can furnish the following accessories to facilitate its GALI can furnish the following accessories to facilitate its assembly when the client prefers to carry assembly when the client prefers to carry out his ownout his own
installation:installation:
11.1. – PUSH-BUTTON AND ELECTRO VALVES
11.1. – PUSH-BUTTON AND ELECTRO VALVES
In the case of control by push-button , this can be installed up to a maximum distance of 5 metres from theIn the case of control by push-button , this can be installed up to a maximum distance of 5 metres from the
starter, using for its starter, using for its connection flexible pipe with an inside diameter of 2.5 mm prepared for connection flexible pipe with an inside diameter of 2.5 mm prepared for a nominal pressurea nominal pressure
of 30 bar. For longer distances an electro valve will be fitted near the starter, wired to an electric push switch.of 30 bar. For longer distances an electro valve will be fitted near the starter, wired to an electric push switch.
In the facilities with In the facilities with automatic starting control, the manual push-button can be replaced with an electro valve.automatic starting control, the manual push-button can be replaced with an electro valve.
When the starter is served with the electro valve included, only the wiring of the latter will be necessary, sinceWhen the starter is served with the electro valve included, only the wiring of the latter will be necessary, since
the starter incorporates the necessary conduits for the air the starter incorporates the necessary conduits for the air signal.signal.
GALI can serve different types of electro valves and pushers. Specific GALI references exist if it is wished toGALI can serve different types of electro valves and pushers. Specific GALI references exist if it is wished to
have the starter with electro valve have the starter with electro valve incorporated. In this case, only the incorporated. In this case, only the electric connection thereof is necessaryelectric connection thereof is necessary
and the main air pipe.and the main air pipe.
11.2. – DRIVE PINIONS
11.2. – DRIVE PINIONS
Besides a great number of standard pinions, GALI can provide specific drive Besides a great number of standard pinions, GALI can provide specific drive pinions for any application of itspinions for any application of its
starters.starters.
All the pinions that GALI All the pinions that GALI supplies have the reference number indicated and directiosupplies have the reference number indicated and direction of rotation on n of rotation on the facethe face
opposite the entry of the teeth.opposite the entry of the teeth.
X
X
XX
XX
XX
XX
XX
XX
XX
REFERENCIAREFERENCIA
ROTACIONROTACION
The usual fastening of the drive pinion is The usual fastening of the drive pinion is implementeimplemented by means of a d by means of a two-part lock nut, with two-part lock nut, with the tighteningthe tightening
torques indicated:torques indicated:
Different fastening methods can be supplied to Different fastening methods can be supplied to order.order.
Installation of the starter on the motor should assure the assembly of the same soInstallation of the starter on the motor should assure the assembly of the same so
that the pinion is that the pinion is sufficsuffic iently protected to avoid risiently protected to avoid risk of entrapments betwek of entrapments between the laen the lattertter
and the crown wheel of the motor, or rubbing against the same. This protectionand the crown wheel of the motor, or rubbing against the same. This protection
should bshould b e dee designed such signed such that it that it catches possible fragments in tcatches possible fragments in t he evehe event of nt of breabreakagekage
of the pinion or of the pinion or crown tcrown teeeeth.th.
REFERENCEREFERENCE
ROTATIONROTATION
To Next Page
Loading...