Chapter 4 Maintenance
Overview
Repair / RMA
Maintenance for the DMC-40x0 controller should be completed using the RMA process with Galil Motion Control.
Do not open the metal enclosure of the DMC-40x0 controller. Removing the metal enclosure will void the warranty.
If the DMC-40x0 controller appears damaged, or is exhibiting unexpected behavior, contact Galil Motion Control to
speak with an Applications Engineer.
Precautions and Procedures
Maintenance procedures to an Original Equipment Manufacturer (OEM) machine should be defined by the OEM.
During maintenance procedures, ensure that all input power to the DMC-40x0 controller is removed. Also ensure
that cabling connected to the IO and communications is removed from the DMC-40x0 controller in order to prevent
damage to these interfaces.
The DMC-40x0 controller should be handled in a way to minimize strain on the connectors. When handling the
DMC-40x0 controller, it should be held from the base-plate and metal enclosure. The DMC-40x0 controller should
not be lifted using the connectors, wiring, or break-out boards.
Maintenance procedures should be defined by the OEM. For technical support and advice, contact Galil Motion
Control to speak with an Applications Engineer.
Chapter 4 Maintenance ▫ 16 DMC-40x0 UL Installation Manual
To Next Page
Loading...
Need help?
General
