Galil Motion Control DMC-4040 Installation Manual

Using This Manual
This manual provides information for the wiring, installation, powering-up, and basic communication to the DMC-
40x0 motion controller with the Galil internal amplifiers. This manual covers the basic installation of the controller
and amplifier modules. For full operational information including specific I/O installation, detailed programming
examples and additional internal amplifier information, see the DMC-40x0 User Manual found here
http://galil.com/downloads/manuals-and-data-sheets.
WARNING
Machinery in motion can be dangerous! It is the responsibility of the user to design effective
error handling and safety protection as part of the machinery. Galil shall not be liable or
responsible for any incidental or consequential damages.
If the DMC-40x0 motion controller and included amplifiers or stepper drivers are not used in
a manner specified by Galil Motion Control, the protection provided by the controller,
amplifiers and drivers may be impaired.
▫ ii DMC-40x0 UL Installation Manual

Galil Motion Control DMC-4040 Specifications

General

Brand	Galil Motion Control
Model	DMC-4040
Category	Controller
Language	English