MorphoAccess Installation Guide | Edition 11 | April 2019
Copyright © Gallagher Group Limited Page 5
4 Before you begin
• If Morpho is already installed and are upgrading your system, you need to remove the Morpho
related drivers or software from the Command Centre server and any workstation that will be
capturing biometrics, as follows:
1. Remove the dongle and any biometric enrolment devices.
2. Open the Windows Add or Remove Programs utility, and remove:
- Morpho MorphoSmart USB Drivers,
- Sentinel Protection Installer 7.x.x, and
- Morpho Integrators Kit
- Morpho License Protection
3. Upgrade the Morpho related drivers and software to the versions listed in this document.
• All Morpho resources and documents are compressed into the Morpho Utilities.zip, located at the
root level of the Command Centre installation files, available from the ftp server or on DVD disc on
request.
To Next Page
Loading...