Gamatronic GMAC-5 - Table 6: GMAC-5 Compatibility Table; Table 7: 1 UDC+ Protocol Alarms; 6 Vents and Alarms; General Events

GAMATRONIC ELECTRONIC INDUSTRIES LTD.
24 G5 User Guide
6. EVENTS AND ALARMS
Type and amount of events in the device depends on the product it is monitoring, and there are also
some general alarms (related to I/O and the system itself) that are always available.
6.1 Product compatibility table
Table 6: GMAC-5 compatibility table
G
AMATRONIC
P
RODUCT
P
ROTOCOL
C
ABLE
MS, MP, MST, µPS, µPS-SP,
MP110, MEGA Power+, Centric,
Power+ Premium
SEC
Crossover RS232 cable (pins 2 and 3 swapped, 5
direct)
Power+
Power+
Direct RS232 cable (pins 2, 3, 5 direct)
GNET, GME, Smart Compact Megatec RS232 cable supplied with the unit
1UDC+ 1UDC+
Special RJ45 to DB9 cable, specific configuration
in System Controller, follow the 1UDC+
Controller user guide
6.2 General events
Table 7: 1UDC+ protocol alarms
NO. NAME DESCRIPTION
1 Serial communication lost Lost communication with external serial device
2 Mail not sent
There was a problem sending email message to at least one
recipient
3 System startup The device was switched on or restarted
4
Log cleared
Log was cleared by the user