GAMATRONIC ELECTRONIC INDUSTRIES LTD.
G5 User Guide 1
1. INTRODUCTION
1.1 General
GMAC-5 is a communication device for power system monitoring.
GMAC-5 is accessed through a built-in web interface, and can be accessed remotely through a web
browser. The interface is intuitive and simple, and configuration is straightforward.
GMAC-5 enables the user to remotely monitor all current Gamatronic products.
1.1.1 I/O
• Serial RS232 port: for UPS or dc power system monitoring.
1.2 Features
• Up to 20 recipients for email notifications.
• Eight user-configurable message groups for routing alarm notifications.
• Remote computer shutdowns with shutdown agent software.
• SNMP v2/v3 communication.
• All UPS protocols are normalized to RFC 1628 (Standard UPS protocol).
• Serial communication supports all Gamatronic UPS systems through SEC, PowerPlus
and Megatec protocols.
• Comprehensive event notification can be filtered by message severity.
• Full featured log includes complete system snapshot saved for every event.
1.3 Technical specifications
TCP/IP, UDP, HTTP, SNMP, SMTP, SNTP
SNMP security
v1/v2: IP/Community filtering;
v3: MD5 authentication and DES encryption
SEC, PowerPlus, Megatec 1ph, 1UDC+
Operating temperature range (°C)
Storage temperature range (°C)
69.5 (W) x 154.5 (L) x 35.5 (H)
The web interface is compatible with Internet Explorer 9+ and with other major browsers. It has been
tested on IE 9-11, Mozilla FireFox, Chrome, and Opera.