Safety Considerations – Environmental Limits
12
• It has been subjected to environmental stress (corrosive atmosphere, fire, etc.).
Do not use your Interface 1010 or any other apparatus if you think it could be hazardous. Have it checked by
qualified service personnel.
Environmental Limits
There are environmental limit conditions on the storage, shipping, and operation of this equipment. The
Interface 1010 is not designed for outdoor use.
Maximum 90% non-condensing
Maximum 90% non-condensing
Cleaning
Disconnect the Interface 1010 from all power sources prior to cleaning.
Use a cloth lightly dampened with either clean water or water containing a mild detergent to clean the outside
of the Interface 1010 enclosure. Alternatively, you can use isopropyl alcohol. Do not use a wet rag or allow
fluid to enter the Interface 1010 enclosure. Do not immerse the Interface 1010 in any type of cleaning fluid
(including water). Do not use any abrasive cleaners.
Warning: The Interface 1010 is not designed for operation in conditions where liquid water
may enter the chassis, or water vapor may condense within the chassis. Operation of an Interface 1010 that
has water within the chassis can create a safety hazard, which could result in personal injury or death.
To Next Page
Loading...