Gardenline CBC36A - Brush Cutter Operation; Brush Cutter Usage Guidelines

32
2 X 20V Li-ion 5-in-1 Cordless Garden Kit
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028
MODEL No.: CBC36A • 10/2020 • 702316
(toll free)
AFTER SALES SUPPORT
(toll free)
2 X 20V Li-ion 5-in-1 Cordless Garden Kit
e-mail: info.aldi@positecgroup.com1300 889 028
MODEL No.: CBC36A • 10/2020 • 702316
Do not use the cutting unit above waist height.
WARNING. The higher the cutting device is o the ground, the
greater the risk of injury from cuttings being thrown sideways.
WARNING. Wear eye protection and heavy clothing, and use the
shoulder strap supplied during opreration.
1) Hold the device with the right hand on the rear handle and left hand on
the P handle.
2) Make sure your footing is rm. Keep feet apart. Divide your weight evenly
on both feet.
3) Switch on the device as described in the chapter “Switching on and o”.
4) Never hold the work head higher than your hip. Work cautiously. The
higher you hold the device the bigger is the risk of thrown objects or
clippings.
5) Plunge the blade from above when cutting undergrowing trees.
6) Move the blade close to the ground to cut young trees or grass.
WARNING. Do not attempt to cut woody material with a larger
diameter, since the blade may catch or jerk the brush cutter
forward. This may cause damage to the blade or the brush cutter or loss
of control of the brush cutter, resulting in personal injury.
WARNING. Improper use of a blade may cause it to crack, chip, or
shatter. Thrown parts may seriously injure the operator or
bystander. To reduce the risk of personal injury, it is essential to take the
following precautions.
1) Avoid contacting with hard or solid foreign objects such as stones, rocks
or pieces of metal.
2) Never cut wood or shrubs with a stem diameter of more than 2cm.
3) Inspect the blade at a regular short interval for signs of damage. Do not
continue working with a damaged blade.
4) Re-sharpen the blade regularly (when it has dulled noticeably) and have it
balanced if necessary (performed by a qualied service technician).
Using the pole saw
WARNING. Before using the pole saw, check that the oil tank is
lled. This ensures the chain is lubricated which is done