Gardenline CBC36A - Troubleshooting Guide; Line Trimmer & Brush Cutter Issues

46
2 X 20V Li-ion 5-in-1 Cordless Garden Kit
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028
MODEL No.: CBC36A • 10/2020 • 702316
(toll free)
AFTER SALES SUPPORT
(toll free)
2 X 20V Li-ion 5-in-1 Cordless Garden Kit
e-mail: info.aldi@positecgroup.com1300 889 028
MODEL No.: CBC36A • 10/2020 • 702316
Problem
Possible Cause Solution
Line trimmer The device does not
start.
20V Xnity Li-ion battery packs
are at.
Charge the 20V Xfinity Li-ion battery packs.
Bad quality cut from
the line trimmer.
Overloaded cutting due to
too high grass.
Wrapped vegetation on the
cutting tool.
Line will not advance.
Line welded to itself.
Not enough line on the
spool.
Line worn too short.
Line tangled on spool.
Cut tall grass from the top down.
Clean the material from the spool and
line.
Manually advance the lines.
Open the spool and line assembly and
ensure the lines have not crossed or
tangled.
NOTE: Always ensure the battery packs
are removed before undertaking this
task.
Manually advance the lines, or install
more line.
NOTE: Always ensure the battery packs
are removed before undertaking this
task.
Pull lines while alternately pressing
down on and releasing bump knob.
Remove line from the spool and
rewind.
Brush cutter The device does not
start.
20V Xnity Li-ion battery packs
are at.
Charge the 20V Xfinity Li-ion battery packs.
Brush cutter Blade
rotates at idle speed.
The Blade is not securely tted.
Ensure the blade nut is tightened.
Troubleshooting