EasyManua.ls Logo

Garmin Diamond DA40 - System Status

Garmin Diamond DA40
538 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
190-00592-06 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA40/40F
325
HAZARD AVOIDANCE
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
SYSTEM STATUS
During power-up, TERRAIN-SVS conducts a self-test of its aural and visual annunciations. An aural alert is
issued at test completion.
Alert Type
PFD/MFD Alert
Annunciation
Aural Message
System Test in Progress
None
System Test Pass None “Terrain System Test OK”
Terrain System Test Fail
“Terrain System Failure”
Table 6-7 TERRAIN-SVS System Test Status Annunciations
TERRAIN-SVS continually monitors several system-critical items such as database validity, hardware status,
and GPS status. If the terrain/obstacle database is not available, the aural message “Terrain System Failure”
is generated along with the ‘TER FAIL’ alert annunciation.
TERRAIN-SVS requires a 3-D GPS navigation solution along with specific vertical accuracy minimums.
Should the navigation solution become degraded or if the aircraft is out of the database coverage area, the
annunciation ‘TER N/A’ is generated in the annunciation window and on the TERRAIN-SVS Page. The aural
message “Terrain System Not Available” is generated. When the GPS signal is re-established and the aircraft
is within the database coverage area, the aural message “Terrain System Available” is generated.
Alert Type
PFD/MFD Alert
Annunciation
Aural Message
No GPS position
Excessively degraded GPS signal
“Terrain System Not Available”
GPS signal re-established None “Terrain System Available”
Table 6-8 TERRAIN-SVS Status Annunciations

Table of Contents