Garmin EDGE EXPLORE 2 - Page 72

Select an option:
• To calculate the route, select View
Map.
• To calculate the route with the
same route back to the start
location, select + > Out and Back.
• To calculate the route with a
different route back to the start
location, select + > Loop to Start.
A map of the course appears.
7 Select Save> Ride.
Creating and Riding a Round-Trip
Course
The device can create a round-trip course
based on a specified distance, starting
location, and direction of navigation.
1 Select Courses > + > Round- Trip
Course.
2 Select Distance, and enter the total
distance for the course.
3 Select Start Location.
4 Select an option.
There are many ways to add a
location. For more information, see
your owner's manual.
5 Select Start Direction, and select a
direction heading.
6 Select Search.
TIP: You can select 0 to search
again.
7 Select a course to view it on the map.
TIP: You can select < and) to view
the other courses.
8 Select Save > Ride.
Device Information
Charging the Device
NOTICE
To prevent corrosion, thoroughly dry
the USB port, the weather cap, and
the surrounding area before charging or
connecting to a computer.
The device is powered by a built-in
lithium-ion battery that you can charge
using a standard wall outlet or a USB port
on your computer.
NOTE: The device will not charge when
outside the approved temperature range
(page 9).
1 Pull up the weather cap CD from the
USB port@.
--- .,_ - - - - - - - - - - - - - - - ~ -
8 Quick Start Manual