Garmin Forerunner 735XT - Page 81

80 Forerunner
®
735XT
EN
• Select Custom, select a message, and
select an alert type.
• Select Time, Distance, or Calories.
3 Enter a value.
Each time you reach the alert value, a message
appears. The device also beeps or vibrates if
audible tones are turned on
(Setting the Device
Sounds, page 87) .
Setting Walk Break Alerts
Some running programs use timed walking
breaks at regular intervals. For example, during
a long training run, you can set the device to
alert you to run for 4 minutes, and then walk
for 1 minute, and repeat. You can use the Auto
Lap
®
feature while using the run/walk alerts.
NOTE: Walk break alerts are available only for
running proles.
1 Select Menu > Activity Settings > Alerts >
Run/Walk > Status > On.
2 Enter a time for the run interval.
3 Enter a time for the walk interval.
Each time you reach the alert value, a message
appears. The device also beeps or vibrates if
audible tones are turned on
(Setting the Device
Sounds, page 87) .
Editing an Alert
1 Select Menu > Activity Settings > Alerts.
2 Select an alert.
3 Edit the alert values or settings.