EasyManua.ls Logo

Garmin Forerunner 910XT - Foot Pod Calibration; Calibrating the Foot Pod

Garmin Forerunner 910XT
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ANT+ Sensors 25

Calibrating your foot pod is optional and
can improve accuracy. There are three
ways to adjust the calibration: distance,
GPS, and manual.


For best results, the foot pod should
be calibrated using the inside lane of
a regulation track. A regulation track (2
laps = 800 m) is more accurate than a
treadmill.

Select  >  > 
 >  >  >


Select a distance.

Select  >  to begin
recording.

Run or walk the distance.

Select .

You must have GPS signals to calibrate
the foot pod using GPS.

Select  >  > 
 >  >  >


Select  >  to begin
recording.

Run or walk approximately
1000 m.
The Forerunner informs you that you have
traveled far enough.

If your foot pod distance seems slightly
high or low each time you run, you can
manually adjust the calibration factor.

Select  >  > 
 >  > 
.

Adjust the calibration factor.
Increase the calibration factor if
your distance is too low.
Decrease the calibration factor if
your distance is too high.

Other manuals for Garmin Forerunner 910XT

Related product manuals