ANT+ Sensors 27
For calibration instructions specic to your
power meter, refer to the manufacturer’s
instructions.
Select > Settings >
> bike name > .
Select in the
eld.
Select .
Keep your power meter active by
pedaling until the message appears.
Before you congure power zones, you
must be in bike sport mode.
You can set seven custom power zones
(1=lowest, 7=highest). If you know
your functional threshold power (FTP)
value, you can enter it and allow the
Forerunner to calculate your power zones
automatically.
Select > Settings >
> bike name >
.
Select an option:
• Select to view and edit the
zones as a percentage of your
functional threshold power.
• Select to view and edit the
zones in watts.
The non-zero data-averaging setting
is available if you are training with an
optional power meter. The default setting
is to include zero values that occur when
you are not pedaling.
To turn the non-zero averaging on or off,
select > >
> > .
When a third-party power meter (page
26) is paired, the Forerunner records
points every second. Recording points
every second uses more of the available
memory on the Forerunner, but creates a
very accurate record of your ride.
If you have an ANT+ compatible weight
scale, the Forerunner can read the data
from the weight scale.
Select > Settings > >
.
To Next Page
Loading...
