Garmin GI 275 User Manual

190-02246-10 GI 275 Part 23 AML STC Installation Manual
Rev. 11 Page C-4
C.2 ADC
The air data computers listed in Table C-3 are compatible with the GI 275.
Table C-3 Compatible Air Data Computers
Mfr Model Data Format Interfacing Equipment Configuration Information Notes
Garmin
Internal
If another ADC is configured, the internal ADC must be configured as
ADC 2 and must be set as the default. Refer to Section 5.5.4.
Only available on GI 275 ADAHRS
and ADAHRS+AP units.
Other GI 275 HSDB
Crossfills data from a different
GI 275 interfaced to an ADC.
GSU 75 ARINC 429
GDC 72 ARINC 429
GDC 74 ARINC 429
G500/G600 TXi HSDB Interfaces page Standby Instrument: GI 275
TXi software v3.02 or later is
required for GI 275 software v2.05
or earlier.
TXi software v3.10 or later is
required for GI 275 software v2.10
or later.

Garmin GI 275 Specifications

General

Type	Electronic Flight Instrument
Display Type	LCD
Power Input	14 or 28 VDC
Operating Temperature Range	-20°C to +55°C
Brightness Control	Automatic and Manual
Certification	TSO-C113
Interfaces	ARINC 429, RS-232
Mounting	Panel Mount