Garmin GPSMAP 62sc - Camera and Photos; Photo Operations

22 GPSMAP 62 Series Owner’s Manual
Camera and Photos
Camera and Photos
You can take photos with the GPSMAP
62sc and GPSMAP 62stc. When you
take a photo, the geographic location
is automatically saved in the photo
information. You can navigate to the
location like a waypoint.
Taking a Photo
1. From the main menu, select
.
2. Turn the device horizontally or
vertically to change the orientation
of the photo.
3. If necessary, press  orto
zoom in or out.
4. Hold the  button to focus.
5. Release the  button to take
a photo.
Setting the Camera for Low
Light
1. From the main menu, select
.
2. Press .
3. Select .
Camera Setup
From the camera, press , and
select .
• —allows you to
select the resolution used to take
photos.
• —allows you to
select where photos automatically
save after they are taken.
Viewing Photos
You can view photos you have taken
with the camera (page 22) and photos
you have transferred to the device
(page 24).