Garmin GPSMAP 62sc - Page 47

GPSMAP 62 Series Owner’s Manual 43
Appendix
install the accessory according to the
instructions that are included with the
accessory.
You can use optional tness accessories
including a heart rate monitor or a
cadence sensor with your device.
These accessories use ANT+
™
wireless
technology to send data to the device.
1. Bring the device within range (3 m)
of the ANT+ accessory.
2. From the main menu, select 
> .
3. Select an option:
• Select  >
.
• Select 
> .
You can view heart rate and cadence
data by customizing your data elds
(page 22).
Tips for Pairing ANT+
Accessories with Your Garmin
Device
• Verify that the ANT+ accessory
is compatible with your Garmin
device.
• Before you pair the ANT+
accessory with your Garmin device,
move 10 m away from other ANT+
accessories.
• Bring the Garmin device within
range (3 m) of the ANT+ accessory.
• After you pair the rst time, your
Garmin device automatically
recognizes the ANT+ accessory
each time it is activated. This
process occurs automatically when
you turn on the Garmin device and
only takes a few seconds when
the accessories are activated and
functioning correctly.
• When paired, your Garmin device
only receives data from your