Saving a Custom Geocache Filter
You can create and save custom filters for geocaches based on specific factors.
1 Select Setup > Geocaching > Filter Setup > Create Filter.
2 Select items to filter.
3 Select QUIT.
By default, the new filter is saved automatically as Filter followed by a number. For example, Filter 2. You
can edit the geocache filter to change the name (Editing a Custom Geocache Filter, page 23).
Editing a Custom Geocache Filter
1 Select Setup > Geocaching > Filter Setup.
2 Select a filter.
3 Select an item to edit.
Viewing Geocache Details
1 Select Geocaching.
2 Select a geocache.
3 Select MENU > Review Point.
The geocache description and logs appear.
Navigating to a Geocache
1 Select Geocaching.
2 Select a geocache.
3 Select Go.
Using Hints and Clues to find a Geocache
You can use hints or clues, such as a description or coordinates, to help you find a geocache.
1 While navigating to a geocache, select MENU > Geocache.
2 Select an option:
• To view details about the geocache, select Description.
• To view a clue about a geocache location, select Hint.
• To view latitude and longitude for a geocache, select Coordinates.
• To view feedback about the geocache from previous searchers, select Logs.
• To turn chirp
™
searching on, select chirp™.
Logging the Attempt
After you have attempted to find a geocache, you can log your results. You can verify some geocaches at
www.geocaching.com.
1 Select Geocaching > Log.
2 Select Found, Did Not Find, Needs Repair, or Unattempted.
3 Select an option:
• To stop logging, select Done.
• To begin navigation to the geocache nearest you, select Find Next Closest.
• To enter a comment about looking for the cache or about the cache itself, select Edit Comment, enter a
comment, and select Done.
If you are signed in to www.geocaching.com, the log uploads to your www.geocaching.com account
automatically.
Main Menu Tools 23
To Next Page
Loading...
