Garmin GPSMAP 66st - Using the Inreach Remote; Satellite Page; GPS Satellite Settings; Customizing the Device

Using the inReach Remote
The inReach remote function allows you to control your inReach device using your GPSMAP 66 series device.
1 Turn on the inReach device.
2 On your GPSMAP 66 series device, select inReach Remote.
3 If necessary, select Pair New inReach.
4 Wait while the GPSMAP 66 series device connects to your inReach device.
5 Select an option:
• To send a preset message, select Send Preset, and select a message from the list.
• To send a text message, select New Message, select the message contacts, and enter the message text
or select a quick text option.
• To send an SOS message, use the arrow keys to scroll through the tabs, and select SOS > Yes.
NOTE: You should only use the SOS function in a real emergency situation.
• To view the timer and distance traveled, use the arrow keys to scroll through the tabs, and select .
Satellite Page
The satellite page shows your current location, GPS accuracy, satellite locations, and signal strength.
You can select or to view additional satellite constellations when they are enabled.
GPS Satellite Settings
Select Satellite > MENU.
Use With GPS On: Allows you to turn the GPS on.
Track Up: Indicates whether satellites are shown with rings oriented with north toward the top of the screen or
oriented with your current track toward the top of the screen.
Single Color: Allows you to select whether the satellite page is displayed in multicolor or single color.
Set Location On Map: Allows you to mark your current location on the map. You can use this location to create
routes or search for saved locations.
AutoLocate Position: Calculates your GPS position using the Garmin AutoLocate
®
feature.
Satellite Setup: Sets the satellite system options (Satellite Settings, page 28).
Customizing the Device
Customizing the Data Fields
You can customize the data fields displayed on each main page.
1 Open the page for which you will change the data fields.
2 Select MENU.
3 Select Change Data Fields.
4 Select the new data field.
5 Follow the on-screen instructions.
26 Customizing the Device