iii190-01182-00 Rev. B
Garmin GTR 225/225A/225B Pilot’s Guide
NOTE: Canadian installations: In accordance with Canadian Radio
Specifications Standard 102 (RSS 102), RF field strength exposure to
persons from an antenna connected to this device should be limited to 60
V/m for controlled environment and 28 V/m for uncontrolled environment.
NOTE: This device complies with Part 15 of
the FCC limits for Class B digital devices. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. Furthermore, there is no
guarantee that interference will not occur in a
particular installation.
If this equipment causes harmful interference,
the user is encouraged to try to correct the
interference by relocating the equipment or
connecting the equipment to a different circuit
other than the affected equipment. Consult an
authorized dealer or other qualified avionics
technician for additional assistance if these
remedies do not correct the problem.
Operation of this device is subject to the
following conditions: (1) This device may not
cause harmful interference. (2) This device must
accept any interference received, including
interference that may cause undesired
operation.
To obtain accessories for your unit, please
contact your Garmin dealer.
The display surface is coated with a special
anti-reflective material, which is very sensitive
to skin oils, waxes, and abrasive cleaners. It is
very important to clean the display using an
eyeglass lens cleaner which is specified as safe
for anti-reflective coatings and a clean, lint-free
cloth.
To Next Page
Loading...
