Garmin OVERLANDER User Manual

The mount does not hold my device in place while I drive
For the best results, you should keep the vehicle mount clean and position the device close to the suction cup.
If the device shifts position while you are driving, you should complete these actions.
• Remove the powered mount from the suction cup arm, and wipe the ball and socket with a cloth.
Dust and other debris may reduce the friction in the ball and socket joint and allow the joint to shift while you
are driving.
• Rotate the hinged arm toward the suction cup as far as your windshield angle allows.
Positioning the device closer to the windshield reduces the effect of jarring and vibration from the road.
My device is not acquiring satellite signals
• Verify the location services feature is enabled.
• Take your device out of car parks and away from tall buildings and trees.
• Remain stationary for several minutes.
The device does not charge in my vehicle
• Check the fuse in the vehicle power cable (Changing the Fuse in the Vehicle Power Cable, page 58).
• Verify that the vehicle is turned on and is supplying power to the power outlet.
• Verify that the interior temperature of the vehicle is within the charging temperature range indicated in the
specifications.
• Verify that the fuse is not broken in the vehicle power socket.
My battery does not stay charged for very long
• Decrease the screen brightness (Display settings, page 52).
• Shorten the display timeout (Display settings, page 52).
• Decrease the volume (Adjusting Sound and Notification Volume, page 53).
• Turn off the Wi-Fi radio when it is not in use (Connecting to a Wireless Network, page 52).
• Put the device in power saving mode when not in use (Turning the device on or off, page 6).
• Keep your device away from extreme temperatures.
• Do not leave your device in direct sunlight.
My device does not connect to my phone
• Select > Bluetooth.
The Bluetooth option must be enabled.
• Enable Bluetooth wireless technology on your phone and bring your phone within 10 m (33 ft.) of the device.
• Verify your phone is compatible.
Go to www.garmin.com/bluetooth for more information.
• Complete the pairing process again.
To repeat the pairing process, you must unpair your phone and device (Deleting a paired phone, page 41) and
complete the pairing process.
Troubleshooting 59

Garmin OVERLANDER Specifications

General

Widescreen	-
Display diagonal	7 \
Touch technology	Multi-touch
Display resolution	1024 x 600 pixels
Battery type	Built-in
Battery life (max)	3 h
Number of batteries supported	1
Form factor	Fixed
Product color	Black
International Protection (IP) code	IP5X
Storage media type	Flash
Compatible memory cards	MicroSD (TransFlash)
Internal storage capacity	64 GB
Marine (chartplotters, sounders)	No
Operating temperature (T-T)	-20 - 55 °C
Headphone connectivity	3.5 mm
Lifetime map updates	Roads change, but with Lifetime Map Updates your map will always be up to date. Start fresh every few months by downloading a new edition of the industry's most accurate map. New editions are issued four times per year.
Cables included	USB

Weight and Dimensions

Depth	24 mm
Width	199 mm
Height	122 mm
Weight	437 g