EasyManua.ls Logo

GASLAND chef Pro Series - Component Replacement Guide; Oven Light Bulb Replacement

GASLAND chef Pro Series
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To replace the oven door:
1. Holding the door firmly, insert the upper arms of both hinges into the slots.
The recesses must hook on the lips.
2. Open the oven door.
Note: You should hear a “click” sound when the door is correctly in place.
3. Move the hinge latch on each side back into the locked position.
4. Open and close the door to test that it operates freely. If it does not, repeat the
door removal and replacement process.
5. Close and open the door slowly to assure that it is correctly and securely in
place.
Replacing an oven light
The oven light is a standard 25 watt(G9) appliance bulb.
Important: Before replacing the bulb, make sure the oven is cool and the controls
are turned off.
1. Disconnect power at the main power supply(Fuse or breaker box).
ELECTRICAL SHOCK HAZARD
Make sure the oven and lights are cool and power to the
oven has been turned off before replacing the light bulb(s).
The lenses must be in place when using the oven.
The lenses serve to protect the light bulb from breaking.
The lenses are made of glass. Handle carefully to avoid breakage.
Failure to do so could result in death, electric shock, cuts or burns.
WARNING
A
B
C
D
A - Upper Arm
B - Recess
C - Slots
D - Lip
38
www.gaslandchef.com
3330-A Marathon Ct Charleston, SC 29418
support@gaslandchef.com
1 (844) 538-7890

Table of Contents

Other manuals for GASLAND chef Pro Series

Related product manuals