2. Using a Phillips-head screwdriver, remove the screw, and then remove the
cover.
3. Remove the burned out bulb from the socket.
Note: To avoid damage or decreasing the life of the new bulb, do not touch bulb
with bare fingers. Wear cotton gloves or use a tissue when replacing the light
bulb.
4. Replace the bulb, and then replace the bulb cover.
5. Reconnect power at the main power supply(fuse or breaker box).
Troubleshooting
First try the solutions suggested here to possibly avoid the cost of a service call.
A
A B
39
www.gaslandchef.com
3330-A Marathon Ct Charleston, SC 29418
support@gaslandchef.com
1 (844) 538-7890
To Next Page
Loading...
