34
The appliance will automatically switch off when not used for more than 5 minutes. In this case,
the screen and all buttons get dark. To reactivate normal operation, simply press any button
of the operating elements.
Tips for Best Results
• Freshly ground coffee is the key to making coffee with more flavour and body.
• Coffee flavour and strength is a personal preference. Vary the type of coffee beans, amount
per cup/shot, and grind size to achieve the flavour you prefer.
• If you are using dual wall filters for your espresso machine, we suggest a coarser grind size
setting in the ESPRESSO range. For single wall filters, use an extra-fine setting (at the right end
of the scale).
• Use freshly roasted coffee beans, preferably with a ‘roasted on’ date.
• Store coffee beans in a dark, cool and dry place. Vacuum seal, if possible.
• Buy in small batches to reduce the storage time and store no more than one week’s supply
at any time.
• Once coffee is ground, it quickly loses its flavour and aroma. For the best results grind beans
shortly before brewing.
• Do not store beans in the bean hopper for a prolonged period.
• When storing the appliance, empty the bean hopper and thereafter run the milling works
empty to remove ground beans left in the milling works.
• If you wish to obtain the maximum freshness of ground coffee, run the milling works for
approx. 2 seconds before each use.
• Clean the bean hopper and milling works regularly.
Coffee Preparation Chart
Coffee Type
Plunger Filter Percolator Espresso
(dual wall)
Espresso
(single wall)
Grind Size
coarse medium coarse medium fine extra fine
Amount
1 up to 12 cups 1 up to 12 cups 1 up to 12 cups 1 up to 8 shots 1 up to 8 shots
Before First Use
WARNING: DO NOT let young children play with the appliance, or any part
of it, or the packaging!
1. Unpack the appliance and all accessories carefully.
2. Check that no parts are damaged or missing. (See: ´Knowing Your Design Coffee Grinder
Advanced Pro`)
3. Carefully remove all shipping materials and promotional materials, but DO NOT remove
the model label. Especially ensure that there are no foreign objects (e.g. packaging material)
in the interior of the bean hopper or milling works. Remove the protective coat that sticks to
the screen.
To Next Page
Loading...
Need help?
General
