32
table or counter. The power cord may not touch hot surfaces or sharp edges. Ensure that no
one will pull the appliance by the power cord. Take care not to entangle in the power cord.
Always grasp the plug to disconnect the power cord. Do not touch the appliance or power
plug with wet hands when the appliance is connected to the power supply.
• DO NOT drip or spill any liquids on the power base or power cord. Do not place the burr
sleeve or bean hopper on the power base, when these parts are wet. Otherwise liquid could
run into the power base, causing risk of electric shock or fire. Additionally, moistened coffee
powder could block the milling works.
Moving Parts
The bean hopper must be assembled and locked properly to operate the appliance. Do not
attempt to deactivate this safety interlock. If the appliance does not work, even when handled
correctly (see ´chapter Operation`), then unplug the appliance. Send the complete appliance
to an authorized service centre for repair.
Do not insert your hands, hair, clothes or any other objects (e.g. cooking utensils) in the bean
hopper, with the appliance connected to the power supply. During grinding, single coffee
beans could leap out of the bean hopper. This could happen especially with the bean hopper
almost empty. Thus, ensure to keep the bean hopper lid firmly closed during operation. Additi-
onally, keeping the bean hopper lid closed will prevent unnecessary loss of flavour and taste.
Technical Specifications
Model: Art. No. 42639 Design Coffee Grinder Advanced Pro
Power supply: 230-240 V AC, 50 Hz
Power consumption: 165 W
Length of power cord: approx. 90 cm
Weight: approx. 2.78 kg
Dimensions: approx. 14.5 cm x 21.0 cm x 39.0 cm
(width x depth x height)
Capacity: Coffee beans: 450 g (approx. 14 cups)
Ground coffee per cylce: 12 cups of coffee or
8 shots espresso
Certification:
To Next Page
Loading...
Need help?
General
