Gate Titan User Manual

24
5.5. Statistics tab
The statistics tab contains main information about your replica performance. You can simply
clear each value by clicking “Reset” button. You can also independently reset BB1 and BB2
counter.
TITAN gives you the option to check:
• Rate of re - Minimum, Average, Maximum
• Trigger response - Minimum, Average, Maximum
• Module’s temperature - Minimum, At this moment, Maximum
• Motor current - Average AUTO, Average SEMI, Maximum Peak
• Battery voltage - Minimum, Last, Maximum
• Number of red BBs - BB1, BB2, TOTAL
Notice
Statistics are saved every ten seconds. If you want to save your
statistics immediately, switch the re selector to SAFE.

Gate Titan Specifications

General

MOSFET	Yes
Battery protection	Yes
Trigger sensitivity adjustment	Yes
Pre-cocking	Yes
ROF control	Yes
Active brake	Yes
Diagnostic system	Yes
Programmable	Yes
Cycle Detection	Yes
Compatibility	V2 Gearbox
Low current consumption in sleep mode	0.2mA
Connectivity	USB-Link, Blu-Link
Fire Modes	Semi, Burst
Bluetooth support	Yes