Gate Titan User Manual

5
Warning
Stay careful to prevent short circuiting the battery as the consequences
can be very dangerous (re, battery explosion, burn).
2.2. Installation
Warning
Before starting installation process, please ensure that
your AEG is empty and there are no BBs inside.
Caution
The incorrect installation may result in sensors’ damage
what is not covered by the warranty.
Caution
Connectors should be bent according to the photo below. Bending
connectors in the opposite direction may cause them to break.

Gate Titan Specifications

General

MOSFET	Yes
Battery protection	Yes
Trigger sensitivity adjustment	Yes
Pre-cocking	Yes
ROF control	Yes
Active brake	Yes
Diagnostic system	Yes
Programmable	Yes
Cycle Detection	Yes
Compatibility	V2 Gearbox
Low current consumption in sleep mode	0.2mA
Connectivity	USB-Link, Blu-Link
Fire Modes	Semi, Burst
Bluetooth support	Yes