Gate Titan - Functions; Trigger Sensitivity Adjustment; Pre-Cocking; Cycle Detection

95
9. Functions
TRIGGER SENSITIVITY ADJUSTMENT
Trigger sensors allow you to control trigger sensitivity. You do not have to disassemble your
AEG. Just use the GATE Control Station app to adjust the trigger to your preferences and level
of skills.
CONFIGURABLE FIRE SELECTOR (gen.2)
Two selector sensors allow you to use up to six re selector modes, including innovative SEMI-
BURST-AUTO mode:
• SAFE-SEMI-AUTO
• SAFE-SEMI-SEMI
• SAFE-SEMI-BURST
• SAFE-BURST-AUTO
• SAFE-SEMI-BURST/AUTO (short press - BURST, long press - AUTO)
• SEMI-BURST-AUTO (SAFE mode via the fast switch SAFE-SEMI-SAFE)*
*available only for TITAN V3 and V2 NGRS and only aer modications.
CYCLE DETECTION
Thanks to the gear sensor(s), TITAN precisely detects in which position the cycle should nish.
Therefore, even the shortest trigger action produces at least one full cycle. Thanks to the cycle
detection function you get:
• Automatic BURST – there is no need to set the burst time.
You can set the burst between two and 10 shots
• Automatic PRE-COCKING – Pre-cocking is fully operational in SEMI, BURST and
AUTO modes. You can simply set the pre-cocking as high, mid or low;
• Full cycle - when the pre-cocking is o, TITAN ensures that the
gearbox completes a full cycle. You gain a higher reliability.
PRE-COCKING (gen.2*)
Victory in the game is oen a matter of fractions of seconds. Thanks to PRE-COCKING, you gain
a trigger reaction similar to a real gun. It allows for initial spring compression, which speeds up
the trigger response signicantly.