EasyManua.ls Logo

Gate Titan - Burst Mode

Gate Titan
101 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
96
There are two PRE-COCKING MODES:
AUTO MODE – the spring is automatically compressed aer each shot
TRIGGER MODE – slow trigger action compresses the
spring, and fast trigger action res the shot.
There are also three PRE-COCKING BOOST options: HIGH / MID / LOW.
*Now the pre-cocking is fully operational in SEMI, BURST and AUTO modes and there is no need
to set the pre-cocking boost manually.
You can change Pre-cocking setup via re selector*. Now you do not need to re the shot to
switch pre-cocking mode. You can do it in two ways:
a) Switch re selector to SAFE and pull the trigger
b) Switch re selector to SEMI, re the shot and keep the trigger pulled
While the trigger is pulled you are able to select pre-cocking mode:
SAFE = Pre-cocking OFF
SEMI = Pre-cocking SMART
AUTO = Pre-cocking AUTO.
*You can turn o this feature by marking o “SEL” button.
Please note: using PRE-COCKING increases wear and tear on the gearbox.
BURST (gen.2*)
The burst enables you to shoot a pre-determined number of BBs, which is very useful in
MILSLIM and when using low-caps. The BURST mode is available aer setting the proper
re selector mode. There are two BURST modes:
FULL – every, even the shortest trigger action res the pre-determined number of
rounds.
TRIGGER – releasing the trigger while ring stops the burst sequence.
* There is no need to set burst time. You can easily set burst between two and 10 shots.
ROF CONTROL
This enables a reduction in a gun’s rate of re. You use stronger LiPo batteries, and still have a
ROF just like in a real gun.

Other manuals for Gate Titan

Related product manuals