78
8.4. Installation
Installation kit contents:
1. M2 steel washer (2 pcs)
2. M2 pressboard washer (2 pcs)
3. Selector plate sticker (6 psc)
4. Female deans-t connector
5. Male deans-t connector
6. 4.8mm x 12mm [0.19in x 0.47in] black heat-shrink tube (2 pcs)
7. 4.8mm x 12mm [0.19in x 0.47in] red heat-shrink tube (2 pcs)
8. 3.2mm x 18mm [0.13in x 0.71in] black heat-shrink tube
9. 3.2mm x 18mm [0.13in x 0.71in] red heat-shrink tube
10. 2.8mm x 0.5mm [0.11in x 0.02in] female terminal (2 pcs)
To Next Page
Loading...
