Gate Titan User Manual

54
Basic Module contents:
1. TITAN V3 with BASIC rmware edition
2. Installation Kit
3. Quickstart Guide
Caution
TITAN V3 is compatible with most standard V3 gearboxes. Please note that
ARES and UMAREX gearbox shells as well as Tokyo Marui Next Generation
gearboxes are not compatible with TITAN V3. If you are not sure whether
your gearbox is compatible, please contact us at titan@gatee.eu
Notice
TITAN V3 is not compatible with Tactical Programming Card.
7.3. Installation safety
Notice
The TITAN V3 ts CNC gearboxes with very small backlash. While tting the
TITAN, pull the cables and at the same time push the board into the right place.
Pay attention to the area marked in yellow to t the board correctly.

Gate Titan Specifications

General

MOSFET	Yes
Battery protection	Yes
Trigger sensitivity adjustment	Yes
Pre-cocking	Yes
ROF control	Yes
Active brake	Yes
Diagnostic system	Yes
Programmable	Yes
Cycle Detection	Yes
Compatibility	V2 Gearbox
Low current consumption in sleep mode	0.2mA
Connectivity	USB-Link, Blu-Link
Fire Modes	Semi, Burst
Bluetooth support	Yes