Gate Titan User Manual

46
25. Connect TITAN to your PC using USB-Link. Start the GATE Control Station App.
26. Pull the trigger slowly. The TRIGGER SENSORS LED indicators will stop glowing,
one by one. They indicate active sensors. In case of some trigger models,
rst sensors might be active even when the trigger is not pulled.

Gate Titan Specifications

General

MOSFET	Yes
Battery protection	Yes
Trigger sensitivity adjustment	Yes
Pre-cocking	Yes
ROF control	Yes
Active brake	Yes
Diagnostic system	Yes
Programmable	Yes
Cycle Detection	Yes
Compatibility	V2 Gearbox
Low current consumption in sleep mode	0.2mA
Connectivity	USB-Link, Blu-Link
Fire Modes	Semi, Burst
Bluetooth support	Yes