21
Replacing the hard drive in the hard drive kit
www.gateway.com
Replacing the hard drive in the
hard drive kit
Tools you need to complete this task:
Screws removed during this task:
To install a new hard drive into the kit:
1 Disconnect the power cord, remove the main and optional secondary
battery, and prepare your notebook by following the instructions in
“Preparing your work space” on page 3.
2 Remove the hard drive kit by following the instructions in “Replacing the
hard drive kit” on page 18.
Phillips #0 screwdriver
4 chrome 3 × 3.5 mm
(hard drive)
To Next Page
Loading...
