31
Replacing the hinge covers
www.gateway.com
Replacing the hinge covers
Tools you need to complete this task:
Screws removed during this task:
To replace the hinge covers:
1 Disconnect the power cord, remove the main and optional secondary
battery, and prepare your notebook by following the instructions in
“Preparing your work space” on page 3.
2 Remove the keyboard cover by following the instructions in “Replacing
the keyboard cover” on page 24.
3 Open the LCD panel all the way, so it lies flat on the table.
Flat-blade screwdriverPhillips #0 screwdriver
4 chrome 2.5×5mm
(hinge covers)
To Next Page
Loading...
Need help?
General
