24
Replacing Components in Your Gateway 600YG2
www.gateway.com
Replacing the keyboard cover
Tools you need to complete this task:
To replace the keyboard cover:
1 Disconnect the power cord, remove the main and optional secondary
battery, and prepare your notebook by following the instructions in
“Preparing your work space” on page 3.
2 Open your notebook.
3 Insert a flat-blade screwdriver or non-marring tool into the wide notch in
the bottom of the keyboard cover just above the SysRq key, then pry the
cover off.
Warning To prevent damage to your notebook while using a
screwdriver, insert a piece of cloth between the
screwdriver, the keyboard, and your notebook case.
Flat-blade screwdriver
To Next Page
Loading...
Need help?
General
