5
Preparing your work space
www.gateway.com
Before working with computer components, follow these guidelines:
■ Avoid static-causing surfaces such as carpeted floors, plastic, and packing
foam.
■ Remove components from their antistatic bags only when you are ready
to use them. Do not lay components on the outside of antistatic bags
because only the inside of the bags provide electrostatic protection.
■ Always hold components by their edges. Avoid touching the edge
connectors. Never slide components over any surface.
Preparing your notebook
To prepare your notebook for maintenance:
■ Make sure that the CD or DVD drive and the diskette drive are empty.
■ Disconnect all peripheral devices and remove any PC Cards.
■ Turn off your notebook and unplug the power cable (if attached).
■ Turn over your notebook and remove the main and optional secondary
batteries.
Warning To avoid exposure to dangerous electrical voltages and
moving parts, turn off your notebook, remove the batteries,
and unplug the power cord and modem and network
cables before opening the case. Replace the cover before
you restore power or reconnect the modem and network
cables.
To Next Page
Loading...
Need help?
General
