52
Replacing Components in Your Gateway 600YG2
www.gateway.com
To replace the speakers:
1 Disconnect the power cord, remove the main and optional secondary
battery, and prepare your notebook by following the instructions in
“Preparing your work space” on page 3.
2 If your notebook has 802.11 wireless networking built in, remove the
Mini PCI module by following the instructions in “Replacing the 802.11
Mini PCI card” on page 13.
3 Remove the keyboard cover by following the instructions in “Replacing
the keyboard cover” on page 24.
4 Remove the keyboard by following the instructions in “Replacing the
keyboard” on page 26.
5 Remove the hinge covers by following the instructions in “Replacing the
hinge covers” on page 31.
6 Remove the LCD panel by following the instructions in “Replacing the
LCD panel assembly” on page 33.
7 Remove the palm rest assembly by following the instructions in “Replacing
the palm rest assembly” on page 39.
8 Remove the eight screws that secure the speakers to your notebook.
Screws
To Next Page
Loading...
Need help?
General
