Frequently asked questions - 65
System cannot read hard disk or optical disc drive information.
Check the following:
• Make sure you are using the correct type of disk.
• Make sure the disc is inserted into the drive correctly.
• Check if the disc is clean and unscratched.
• Check your drive by using a good (undamaged) disc. If your drive can
not read the information on the good disc there may be a problem with
the drive. Contact your dealer or technical support center for assistance.
System cannot write data on the hard disk or disc.
Check the following:
Make sure the disk is not write-protected.
Make sure you are using the correct type of disc.
To Next Page
Loading...
Need help?
General
